Re: Wes's Maroon 1947 Custom Super Clipper
Posted by Wesley Boyer On 2020/5/31 20:09:47
A little over three years ago I first looked into it but never put it in practice. Here is the original blog:https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=19125&forum=12&post_id=189617#forumpost189617
And my youtube video on it:https://www.youtube.com/watch?v=6UDLFoF2Evo
I've got it install I still need to get a 250 ohm resistor to cut it down from 230 ohms to the 100 ohms to show empty. I would have thought that I would need a 230 ohm resistor, but when I set up my test station the 250 worked the best. If anything I can always change it out.
Wes
Attach file:
(283.98 KB)
And my youtube video on it:https://www.youtube.com/watch?v=6UDLFoF2Evo
I've got it install I still need to get a 250 ohm resistor to cut it down from 230 ohms to the 100 ohms to show empty. I would have thought that I would need a 230 ohm resistor, but when I set up my test station the 250 worked the best. If anything I can always change it out.
Wes
Attach file:
(283.98 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=222916