Re: Wes's Maroon 1947 Custom Super Clipper

Posted by Wesley Boyer On 2020/7/24 20:05:21

Okay, current update.
Disconnected the Shift Linkage from the Shifting Column, not very easy, while under the car for that found my Brake Master Cylinder is still leaking. I thought that I had that fixed! O'well thats for another day.
So got both Linkages unhooked, it wasn't easy do to the position of the linkage.
Next unmounted the Reverse Switch and left the mount loose since it has a slot that it fits in.
Now in the car, I removed about six screws holding the upper carpet in place and as pulling it back found it's backing broken in a few places.
Turns out the gas pedal had a cover over it. Once I removed that I was able to pop the Gas pedal loose and roll the lower carpet back. Exposing the plate to the steering column with two missing screws, later noticed the screws and washer were laying under the floor matting.
After removing the only two screws holding the plate, next removed the two silver screws in the black board for room.
And removed the plate.
Wes

Attach file:

---

  (264.57 KB)


  (388.28 KB)


  (264.32 KB)


  (286.28 KB)


  (300.32 KB)


  (328.51 KB)


  (234.53 KB)


  (306.94 KB)


  (330.24 KB)