Re: Wes's Maroon 1947 Custom Super Clipper
Posted by Wesley Boyer On 2020/7/24 21:48:54
Well I thought that I was ready to pull the column out, but boy was I wrong.
I forgot I still haven't taken off the Steering Wheel. No problem there it pop right off with my self made steering wheel puller tool. (No photos of that.)
Started pulling column out but would only move about an inch. Check to make sure the shift arms weren't catching on anything and removed the U bolt and still can't get it to move more then about an inch.
Finally noticed the spring and collar at the end of the steering shaft, removed both of them and after a few tugs the whole column came off. As I was pulling it off making sure not to touch the ceiling, plenty of room.
Now comes the clean up of the column.
Wes
Attach file:
(231.69 KB)
(252.16 KB)
(255.42 KB)
(311.82 KB)
(205.84 KB)
(337.84 KB)
I forgot I still haven't taken off the Steering Wheel. No problem there it pop right off with my self made steering wheel puller tool. (No photos of that.)
Started pulling column out but would only move about an inch. Check to make sure the shift arms weren't catching on anything and removed the U bolt and still can't get it to move more then about an inch.
Finally noticed the spring and collar at the end of the steering shaft, removed both of them and after a few tugs the whole column came off. As I was pulling it off making sure not to touch the ceiling, plenty of room.
Now comes the clean up of the column.
Wes
Attach file:
(231.69 KB)
(252.16 KB)
(255.42 KB)
(311.82 KB)
(205.84 KB)
(337.84 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=224981