Re: Wes's Maroon 1947 Custom Super Clipper
Posted by Wesley Boyer On 2020/8/14 20:38:07
Well tonight I figured I would tie up a couple of loose ends.
As always, a BIG THANKS goes out to Howard, I don't know where we would be without him. Yes I do LOST! So THANKS again!
Dell, it looks like I could use a TAIL AND STOP SOCKET, I tried my best but couldn't get them freed up. So PM me and let me know.
PTV, the photo shows how far I got before I gave up and pulled the whole column out. I was working away from home and didn't have a punch or hammer at the time, so I just took it all out. Plus when the spring popped out the end I think I lost the plug that goes in the end between the cotter pin and spring. If it had one?
Almost got everything cleaned up, so getting ready to put it all back together.
Attach file:
(160.60 KB)
As always, a BIG THANKS goes out to Howard, I don't know where we would be without him. Yes I do LOST! So THANKS again!
Dell, it looks like I could use a TAIL AND STOP SOCKET, I tried my best but couldn't get them freed up. So PM me and let me know.
PTV, the photo shows how far I got before I gave up and pulled the whole column out. I was working away from home and didn't have a punch or hammer at the time, so I just took it all out. Plus when the spring popped out the end I think I lost the plug that goes in the end between the cotter pin and spring. If it had one?
Almost got everything cleaned up, so getting ready to put it all back together.
Attach file:
(160.60 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=225609