Re: Stewart's 1955 Packard 400

Posted by HH56 on 2013/7/16 10:51:40
To remove the fender I believe you will have to take the two bolts in question off as well as a third and also the complete half of the upper grill bar because it wraps around the fender slightly. Wouldn't even attempt trying to maneuver around it. The grill bars won't tolerate much stress or twisting and break easily. Fender removal and bolt locations to be removed is covered in section 10 of the service manual. You can download the section if you don't have one.

This Post was from: