Re: Stewart's 1955 Packard 400
Posted by Stewart Ballard On 2014/3/12 9:53:45
I am actually looking into purchasing a rotissorie or body cart/dolly. Some of them have maximum weight requirements. The lowest weight of those I have seen 1500 lbs.
Am leaning toward this make and modelhttp://www.autotwirler.us/product-p/bcpl.htm
It supports 3000 lbs so weight is not an issue. I also like the design with the center rail under the body. It allows easy access to the underside of the car and I can excape quickly if needed. Many models are square with suports on all 4 sides. That makes access to the underside more difficult and prevents a quick exit. This model also has adjustable height and its made about 100 miles of here so I may be able to save on shipping cost and pick it up.
Also, I can't even look out my front door and see 6 houses. I'm sure not going to get 6 guys to come over an lift the body like Henry did.
Attach file:
(3.51 KB)
Am leaning toward this make and modelhttp://www.autotwirler.us/product-p/bcpl.htm
It supports 3000 lbs so weight is not an issue. I also like the design with the center rail under the body. It allows easy access to the underside of the car and I can excape quickly if needed. Many models are square with suports on all 4 sides. That makes access to the underside more difficult and prevents a quick exit. This model also has adjustable height and its made about 100 miles of here so I may be able to save on shipping cost and pick it up.
Also, I can't even look out my front door and see 6 houses. I'm sure not going to get 6 guys to come over an lift the body like Henry did.
Attach file:
(3.51 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=140849