Re: Stewart's 1955 Packard 400
Posted by Stewart Ballard On 2014/9/11 20:15:24
I got the compensator off so the frame is ready for sandblasting. Will work on that next week.
Now, I have a dumb question.
I was doing a test install tonight of the Olds oil pump and adapter I got from Jack Vines. The pump does not have a place to attached a hose. I've seen images on this site of the olds pump with a hose attached to the side of the pump housing and to the block.
Am I supposed to drill and tap this myself or do I not need one.
Attach file:
(105.14 KB)
Now, I have a dumb question.
I was doing a test install tonight of the Olds oil pump and adapter I got from Jack Vines. The pump does not have a place to attached a hose. I've seen images on this site of the olds pump with a hose attached to the side of the pump housing and to the block.
Am I supposed to drill and tap this myself or do I not need one.
Attach file:
(105.14 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=149850