Re: Stewart's 1955 Packard 400
Posted by Stewart Ballard On 2015/10/6 19:13:04
All four tires are back in place. I have moved onto the Steering and T/L assembly.
I was going to redo the T/L compensator motor myself but shipped it all off to Michiana Packard yesterday instead.
The coating on the armature was deteriorating and small chips were missing. It would have taken me month to do myself so now its Troys problem.
Was looking back through some old threads here talking about the solenoid on the T/L. Found one that suggested Cole-Hersee model 24046 - 12V Insulated Intermittent Duty SPST Solenoid (the top image). But I am wondering if the one in the second image might be better. Model 24071 12V Grounded Intermittent Duty SPST Solenoid.
Anyone have any input?
Attach file:
(10.64 KB)
(6.51 KB)
I was going to redo the T/L compensator motor myself but shipped it all off to Michiana Packard yesterday instead.
The coating on the armature was deteriorating and small chips were missing. It would have taken me month to do myself so now its Troys problem.
Was looking back through some old threads here talking about the solenoid on the T/L. Found one that suggested Cole-Hersee model 24046 - 12V Insulated Intermittent Duty SPST Solenoid (the top image). But I am wondering if the one in the second image might be better. Model 24071 12V Grounded Intermittent Duty SPST Solenoid.
Anyone have any input?
Attach file:
(10.64 KB) (6.51 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=167626