Re: Stewart's 1955 Packard 400
Posted by Stewart Ballard On 2015/12/20 17:45:29
Opened up the T/L limit swith to make sure no moisture had got into it over the years. All within looks brand new so I am just cleaning up th exterior and adding fresh painting now. I found a replace cover, seal & grommet for the wiring at Max's.
I thought I took some pictures of the finished piece but I guess not. WIll take one next time I am out there. I am working on a new wiring harness for the T/L now. This is also slow going as I wanted to use all the right wire colors in case I have problems later on and need some of the PackardInfo, Info. Slowly getting all the other T/L components back together. I keep forgetting to take my laptop, with all the pictures, out with me so I can start putting it back together.
Attach file:
(134.30 KB)
(164.55 KB)
I thought I took some pictures of the finished piece but I guess not. WIll take one next time I am out there. I am working on a new wiring harness for the T/L now. This is also slow going as I wanted to use all the right wire colors in case I have problems later on and need some of the PackardInfo, Info. Slowly getting all the other T/L components back together. I keep forgetting to take my laptop, with all the pictures, out with me so I can start putting it back together.
Attach file:
(134.30 KB)
(164.55 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=169994