Re: Stewart's 1955 Packard 400
Posted by Stewart Ballard On 2016/2/17 19:50:05
Tearing down and removing all the seals and such from the Bendix control valve and cylinder were a lot easier then I expected it to be. I sure hope it goes back together just as easily.
I have already ordered both kits to replace the seals.
Its supposed to be in the 60's this weekend so hopefully I can get all the T/L components removed, rubberized and reinstalled before it gets cold again.
Attach file:
(90.47 KB)
(92.75 KB)
(67.37 KB)
I have already ordered both kits to replace the seals.
Its supposed to be in the 60's this weekend so hopefully I can get all the T/L components removed, rubberized and reinstalled before it gets cold again.
Attach file:
(90.47 KB)
(92.75 KB)
(67.37 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=172411