Re: Stewart's 1955 Packard 400
Posted by Stewart Ballard On 2016/12/31 19:06:22
Does anyone know what the measurement is for the bolt holes of the manifold where the riser connects?
I found a spacer on eBay for a Ford 352. They call this a "Heat Riser Valve Eliminator Spacer". My manifolds are already bolted on so I can't measure it without removing it from the engine. This one is showing the holes either 3" or 3 and 1/16 on centers.
Attach file:
(14.95 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=186330