Re: Stewart's 1955 Packard 400
Posted by Stewart Ballard On 2018/2/16 17:35:53
For the past year, I have been watching Ebay for a 6 blade Dodge cooling fan. KevinAZ pointed me in that direction when I was AZ last winter. His had the DCPD stamp on it. I have been using multiple searches parameters and could not find a thing for 12 months.
Last week I stumbled on a 6 blade 17" fan that had measurements for the holes that were close to the Packards so for $24 I bought it. The seller had no idea what it came off of and it does not have the Dodge stamp on it.
The center hole was about 1/16 to small but 1 hour with my drimmel and its fitting good now. As an added bonus the screw holes are larger than needed but they match up pretty good with the water pump.
Attach file:
(115.93 KB)
(191.92 KB)
Last week I stumbled on a 6 blade 17" fan that had measurements for the holes that were close to the Packards so for $24 I bought it. The seller had no idea what it came off of and it does not have the Dodge stamp on it.
The center hole was about 1/16 to small but 1 hour with my drimmel and its fitting good now. As an added bonus the screw holes are larger than needed but they match up pretty good with the water pump.
Attach file:
(115.93 KB)
(191.92 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=200255