Re: Stewart's 1955 Packard 400
Posted by Stewart Ballard On 2021/9/22 20:48:05
Believe it or not, I did all that work 5 years ago. If you look at page 48 of this blog you will see what I posted about that cross member.
I had to get it modified by a local guy because it was too high. You bringing that up gives me a plan c.
If all else fails I can pull that cross member out and make modifications that will let the trans sit a little lower. That should give me more clearance to move the body forward.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=237129