Re: Stewart

Posted by Dads 56 On 2021/11/27 22:08:38

I had a similar issue when doing mine. when assembling it I couldn't get it to seat tight. so I took a piece of hardwood, drilled a 15/16" hole 3 " deep, cut out the top portion, place a hardened washer on top, this had a portion of it cut out to fit around the copper pipe. then I place a 3/4" socket on top and with a clamp pulled it snug before bending the tabs down. seemed to work, hopefully the photos attachedhttps://packardinfo.com/xoops/html/uploads/newbb/216126_60a3525f0342f.jpghttps://packardinfo.com/xoops/html/uploads/newbb/216126_60a3528180b5e.jpg