Re: Stewart
Posted by Stewart Ballard On 2021/12/29 11:37:49
Fixed that nasty bent section of the door with my improvised body tool and I found one of those stress cracks in the door that Howard warned me about, lucky me.
I started cleaning up the steering column. Should I break it down? I do have a little experience with GM steering columns on my old square body. I don't want to replace that wiring plug until I know if it's necessary. It certainly needs to be repainted.
Currently working on:
1. sanding the body for paint this spring.
2. Dashboard rewire.
3. doors repair
4. Steering column cleaning
Attach file:
StressCrack.jpg (134.25 KB)
ImprovisedBodyTools.jpg (198.34 KB)
DentFixed.jpg (110.22 KB)
I started cleaning up the steering column. Should I break it down? I do have a little experience with GM steering columns on my old square body. I don't want to replace that wiring plug until I know if it's necessary. It certainly needs to be repainted.
Currently working on:
1. sanding the body for paint this spring.
2. Dashboard rewire.
3. doors repair
4. Steering column cleaning
Attach file:
StressCrack.jpg (134.25 KB)
ImprovisedBodyTools.jpg (198.34 KB)
DentFixed.jpg (110.22 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=239943