Re: Stewart
Posted by Stewart Ballard On 2022/12/15 19:18:04
I am sure some of you are riveted to the edge of your chairs regarding the striping on the stainless steel wrap.
I was not happy with the result of the Sharpie Oil Paint pen. As
humanpotatohybrid said above it, peeled off too easily. I even used a cheap rattle can clear coat on part of it and it was only slightly better.
I have already ordered a Forney Paint pen and we will see if that works.
I did finally manage to get the last of the little clips inside of the rear windshield installed. It really would have helped to know that there were two different sizes. Fortunately, I had a few extra from Packard Southwest and was able to get the job done.
Attach file:
20221129_154754_resized.jpg (126.83 KB)
I was not happy with the result of the Sharpie Oil Paint pen. As
humanpotatohybrid said above it, peeled off too easily. I even used a cheap rattle can clear coat on part of it and it was only slightly better.
I have already ordered a Forney Paint pen and we will see if that works.
I did finally manage to get the last of the little clips inside of the rear windshield installed. It really would have helped to know that there were two different sizes. Fortunately, I had a few extra from Packard Southwest and was able to get the job done.
Attach file:
20221129_154754_resized.jpg (126.83 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=251616