Re: Stewart
Posted by Stewart Ballard On 2023/1/1 19:51:18
I am trying to figure out the baffle or divider that is inside the heater plenum.
There appear to be 2 but I can only figure out one of them.
The first image below shows the internal"channel" that holds the baffle in place. The problem is that I have a single piece (2nd image) that fits perfectly inside that channel and down the length to the flap.
What remains of the back side also has what appears to be an internal baffle running down the length (3rd image).
I believe that they both belong inside but I can't imagine why.
Attach file:
20230101_130035_resized.jpg (199.91 KB)
Divider1.jpg (199.17 KB)
DividerAttachedToBack.jpg (149.43 KB)
There appear to be 2 but I can only figure out one of them.
The first image below shows the internal"channel" that holds the baffle in place. The problem is that I have a single piece (2nd image) that fits perfectly inside that channel and down the length to the flap.
What remains of the back side also has what appears to be an internal baffle running down the length (3rd image).
I believe that they both belong inside but I can't imagine why.
Attach file:
20230101_130035_resized.jpg (199.91 KB)
Divider1.jpg (199.17 KB)
DividerAttachedToBack.jpg (149.43 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=252264