I placed a washer behind each of the lower hinge bolts in order to alight he door better. That helped but it was not enough. So, I have added a second washer to each bolt. I am short on hands today so have not remounted the door but I am not sure i want to do that anyway. Look at the first few images below. I am not sure I like being able to see through that gap.
The new fuel tank arrived today. I took some pictures of them side by side. I have read on this site about the filler tube being “off” a little bit. That issue has not been resolved. I put a tape measure on each one and it shows the height difference.
That last image with the spring. I found those 3 parts in a bag with parts. I was positive that I must have left them out of the rebuild that I did on the steering column but when I pull the gear selector lever it springs back. That is the internal spring at work, correct? I have no clue what that spring and other parts are for.
Attach file:
20230628_133717_resized.jpg (40.59 KB)
20230628_134015_resized.jpg (51.80 KB)
20230628_134022_resized.jpg (57.80 KB)
20230628_142800_resized.jpg (106.51 KB)
20230628_142832_resized.jpg (64.23 KB)
20230628_143117_resized.jpg (65.93 KB)
20230628_143315_resized.jpg (78.88 KB)
20230627_152856_resized.jpg (82.16 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=258628