Re: Stewart's 1955 Packard 400
Posted by Stewart Ballard On 2023/11/19 14:44:20
The new PW master switch came in yesterday. One of the pins is slightly bent but so it is used. I can't complain though. Its movements are like new. I am lucky it was listed for a Caddy because it was about 55% less than the switches listed for Packard.
I gave it a quick test and it worked the regulator as it should.
Now I need to locate some compatible wire connections so I can connect it the right way. I could splice into the old wires but would prefer to replace the wires if I can find the right connectors in the second image.
Attach file:
20231119_123456_resized.jpg (359.95 KB)
20231119_140407_resized.jpg (195.43 KB)
I gave it a quick test and it worked the regulator as it should.
Now I need to locate some compatible wire connections so I can connect it the right way. I could splice into the old wires but would prefer to replace the wires if I can find the right connectors in the second image.
Attach file:
20231119_123456_resized.jpg (359.95 KB)
20231119_140407_resized.jpg (195.43 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=264650