Re: Howard's 47 Custom project
Posted by HH56 On 2013/5/7 22:34:49
Quote:
51Packard wrote:
How about studs and nuts used in electrical connections? I cleaned up and painted my generator, but now the studs and nuts for the wire connections are rusting. Would you just connect the wire and then clear over it?
You could do the clear or get some dielectric or silicone grease and use a rag to apply a very light coat on the threads and nut after the wire is connected. That way if you have to remove things there would be no buildup of paint material that might cause problems later. Downside to the grease is it might attract dirt but shouldn't be too much of a problem if the application is light.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=122641