Re: Howard's 47 Custom project
Posted by HH56 On 2018/1/18 23:00:44
Wes, thanks for the photo. I did mine similar except I kept the wire on the left of the hinge and entered a hole on that side rather than crossing over the hinge.
Keith, that is a pair of 6v batteries and a switching module. When AC is off they are in parallel to charge but when AC is on they switch to series for 12v to AC. I have not decided on keeping the arrangement because it is a bit much. Am leaning toward simpler using a small alternator adapted to run in place of the PS pump on the back of a Chrysler generator. Will charge these two always in series or possibly a small 12v hidden and sealed battery.
Attach file:
(78.70 KB)
Keith, that is a pair of 6v batteries and a switching module. When AC is off they are in parallel to charge but when AC is on they switch to series for 12v to AC. I have not decided on keeping the arrangement because it is a bit much. Am leaning toward simpler using a small alternator adapted to run in place of the PS pump on the back of a Chrysler generator. Will charge these two always in series or possibly a small 12v hidden and sealed battery.
Attach file:
(78.70 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=199411