Re: Debi's 1953 Patrician
Posted by Duane Gunn On 2013/9/14 0:40:37
Got the engine back. All the bearing were replaced, the crankshaft was ground down, the cam shaft was replaced due to broken teeth. The Oil pump was rebuilt. I replaced 3 hydrualic lifters and 1 cam follower. The valves were previously ground and the guy took a little off the shaft as well. I am in the process of putting the engine back together. The oil pump is not in so timing will be fun.
I am trying to clean up the interior chrome. The 2nd picture is of the 2 chrome pieces on the dashboard. The top one is the after picture as the bottom is the before I took steel wool to it. I did not use any lube or paste, just steel wool.
Attach file:
(127.40 KB) (186.05 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=131269