Re: Debi's 1953 Patrician
Posted by Duane Gunn On 2014/10/22 14:16:30
I put the original headlights back in, but when I put the halogen lights in I will use the relays and follow the above schematics.
On another problem:
I was driving home and the car stalled. I popped the hood and took the following picture. This wire goes from the ignition to the coil. I did install the pertonix ignitor and that wire is fine. The insulation melted off the wire. This is a brand new wiring harness. I am guessing a larger (thicker) wire would work, but what caused the wire to over heat and melt the insulation?
Attach file:
(86.29 KB)
On another problem:
I was driving home and the car stalled. I popped the hood and took the following picture. This wire goes from the ignition to the coil. I did install the pertonix ignitor and that wire is fine. The insulation melted off the wire. This is a brand new wiring harness. I am guessing a larger (thicker) wire would work, but what caused the wire to over heat and melt the insulation?
Attach file:
(86.29 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=151751