Re: Debi's 1953 Patrician

Posted by fredkanter On 2017/5/5 5:02:03
Sometimes distributors are just ornery. As you know, there's nothing holding them in except the 2 bolts from the outside. Fashion a "slide hammer" of sorts. Take some small chain from the hardware store, loop it around the body and put a small bolt/nut to hold it tight.

Then have a few feet free, put it through something heavy (stale bagel or bricck with holes in it) and put a large washer over the end. Finish the end with a suitable bolt.
Pull up sharply on the brick, eat bagel.

This Post was from: