Re: Jeff's 48 Custom 8 Victoria Project
Posted by Ozstatman On 2013/11/9 15:23:02
"Thanks go out to Mal for posting pics of the custom clutch alignment tool on his "Wade's Workshop" blog. I took the idea and fine tuned it to fit the 22nd Series Custom 8 clutch. It worked perfect.
Jeff
BTW, It appears that the trans fill plug and overdrive fill plug are at slightly different levels. Any suggestions on which one to go by?"
Jeff,
Glad that someone, you, was able to pick up, refine and run with my workaround for a clutch alignment tool!
Regarding the different fill levels for the trans and the OD, supposedly the two are separate systems requiring their own lubrication so fill each to their own level.
JeffBTW, It appears that the trans fill plug and overdrive fill plug are at slightly different levels. Any suggestions on which one to go by?"
Jeff,
Glad that someone, you, was able to pick up, refine and run with my workaround for a clutch alignment tool!
Regarding the different fill levels for the trans and the OD, supposedly the two are separate systems requiring their own lubrication so fill each to their own level.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=134760