Re: HA's 52 200 Grey Ghost
Posted by Hans Ahlness On 2015/6/21 22:19:05
I have all the wires in place and bundled, and I have hooked up all the wires forward of the firewall. I installed relays for the headlights and just have to come up with conduit to protect the wires as they pass through the front wheel well area before I intall the headlight plugs. I also installed a new key-start ignition switch.
As a Father's day present to myself I got far enough to get the engine running again for the first time since last fall, along with testing my wires for leaking smoke. No smoke, and the engine fired right up! Still sounds like heck but it runs smoothly.
Now I can pull the left fender back off, finish hooking up all the lower wires and lights, clean up that fender, and wire up a plug for the guage cluster for easy removal in the future.
Attach file:
(50.41 KB)
(42.28 KB)
As a Father's day present to myself I got far enough to get the engine running again for the first time since last fall, along with testing my wires for leaking smoke. No smoke, and the engine fired right up! Still sounds like heck but it runs smoothly.
Now I can pull the left fender back off, finish hooking up all the lower wires and lights, clean up that fender, and wire up a plug for the guage cluster for easy removal in the future.
Attach file:
(50.41 KB)
(42.28 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=163326