Re: HA's 52 200 Grey Ghost

Posted by Hans Ahlness On 2015/7/18 23:28:52

I've been working steadily for the last 2 weeks, a lot of flying out of town so not much time to work on the Ghost. But today I cut and installed a new divider for between the trunk and back seat. I made my new one out of 1/4" plastic sign board, I bought a 4x8 sheet of it from one of the local sign companies for less than $20. I attached it with plastic push-in rivets (used for a lot of modern interiors) that are easier to remove than the old metal clips. I also sanded, primed and painted my inner left front fender to dress up the engine compartment. I'd already done the right fender and installed that. These will get redone with some weld repairs when the car gets painted someday, but it looks better for now.

While the paint was drying, I installed the soundproofing material on the floor - some generic Dynamat type stuff I got from Kanter. I need another pack of that stuff to do the inside of the roof too, since I removed all the old asbestos-tarpaper stuff that had been originally installed in the car.

Attach file:

---

  (34.11 KB)


  (24.30 KB)


  (20.23 KB)