Re: 51Packards....52 Packard 200 Deluxe!

Posted by Charles On 2014/8/31 16:29:06

8-31-14

Started making the rear wire harness. The "body feed" wires were not labeled with a color so I chose white for the body feed and green for the grounds to the switches. That's what the colors kind of looked like in the car. I started at the rear reading light and worked toward the dash. I also ran the taillight wires at the same time.

Hardest part was getting the wires down the drivers pillar. I cut the wires near the entry hole and bound the new wire to it. Then one at a time I pulled the wires from behind the dash and helped the new wires from the top. Worked really well.

Temps in the car cut my work day short. I still have to run the wire for the gas gauge.