Re: 51Packards....52 Packard 200 Deluxe!

Posted by Charles On 2014/9/21 16:29:25

I "think" I have a short. I took my multimeter and connected one end to ground. I read 6.3v at both terminals of the coil and also at the distributor. I switched to ohms and even with the points open, I read conductivity when I put one probe on the stationary plate and other on the moveable arm on the points. I guess I need to remove the distributor and replace the points. I can also put in the proper flex wire and might as well replace the condensor.