Re: 51Packards....52 Packard 200 Deluxe!

Posted by HH56 On 2016/6/29 14:28:37

If the new cylinder does not come with them, you may also need new copper washers or gaskets when you transfer the brass block and screw. Possibly you can get by with softening or annealing the old ones but if they are really scarred or scratched then they won't seal and can be somewhat hard to come by in our size. When I did the 47 Napa was able to match the size but locally It took more than one store to find them. Not much call for them anymore so one store showed stock but could not find the correct item. Two others only had one or the other but not both sizes in stock. O'Reilly didn't have either in stock and would have had to special order.