Re: 51Packards....52 Packard 200 Deluxe!
Posted by Charles On 2017/7/4 18:35:22
7-4-17
So far so good. Got the roof cleaned with the POR cleaner/degreaser and followed by the POR metal prep. All the surface rust turned a gray ashy look.
Used plastic cups to pour the POR-15 into as they recommend you use a separate container. At first, the paint went everywhere as I was over filling the paint brush and it would drip like crazy. Luckily I was wearing a Tyvek suit, spray paint sock, respirator and goggles! At the end of the first coat, I saw the paint had eaten through the cup! Work fast before your container springs a leak!
Once I got the hang of it, the thin paint went on quickly. Two coats seems to have done the job. Second coat was much faster than the first. The floor boards will be easier since I know what to expect. I ordered semi gloss black for the floors which should arrive tomorrow.
Attach file:
(273.70 KB)
(292.87 KB)
So far so good. Got the roof cleaned with the POR cleaner/degreaser and followed by the POR metal prep. All the surface rust turned a gray ashy look.
Used plastic cups to pour the POR-15 into as they recommend you use a separate container. At first, the paint went everywhere as I was over filling the paint brush and it would drip like crazy. Luckily I was wearing a Tyvek suit, spray paint sock, respirator and goggles! At the end of the first coat, I saw the paint had eaten through the cup! Work fast before your container springs a leak!
Once I got the hang of it, the thin paint went on quickly. Two coats seems to have done the job. Second coat was much faster than the first. The floor boards will be easier since I know what to expect. I ordered semi gloss black for the floors which should arrive tomorrow.
Attach file:
(273.70 KB)
(292.87 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=193638