Re: Ken's 1937 120 Touring Sedan

Posted by Cli55er On 2017/2/11 13:29:51

I thInk I have two vacuum leaks. One at the carb linkage shaft and the other at the windshield wipers under the dash. All of the hoses look good so I think it is the mechanism that turns on the wipers. I'm going to plug the soft line going to the vacuum side of the fuel pump to eliminate that source. The carb will need rebushed.

Got an exhaust leak at the weighted valve after getting the new pipes and mufffler put on. I may take it completely off and weld the holes shut. Or fix it with the kit like you did. Who knows what my wacky brain will tell me to do.

The carb mixture screws are about 1-1/2 turns out. Still a bit rich but not nearly as bad as what I started with.

Good luck on the project!!