Re: Ken's 1937 120 Touring Sedan
Posted by Ken_P On 2020/5/5 21:16:24
Well a few steps forward and a few steps back, as always.
- installed some different packing in the water pump; it stopped piddling on the floor, which is nice.
- installed the floorboard and started installing the rubber floor mat.
- installed one NOS tail light trim ring.
- installed the new drivers side shock and reinstalled the coil spring.
Now, the steps back:
- cracked the second NOS tail light trim ring because the new weather strip is so tight.
- have my king pins back from the machinist. Went to install. I somehow threw away the shim from the passenger side and the old bearing from the drivers side. Initial looks indicate I will need a shim with the new bearing. Walked away for the night!
Attach file:
(38.46 KB)
(39.22 KB)
- installed some different packing in the water pump; it stopped piddling on the floor, which is nice.
- installed the floorboard and started installing the rubber floor mat.
- installed one NOS tail light trim ring.
- installed the new drivers side shock and reinstalled the coil spring.
Now, the steps back:
- cracked the second NOS tail light trim ring because the new weather strip is so tight.
- have my king pins back from the machinist. Went to install. I somehow threw away the shim from the passenger side and the old bearing from the drivers side. Initial looks indicate I will need a shim with the new bearing. Walked away for the night!
Attach file:
(38.46 KB)
(39.22 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=222104