Re: Mike's 53 Clipper

Posted by Tobs On 2013/8/27 10:37:54

Danke Gusha! Today I took the yoke out of the rear axle, and the seal I had bought is too big in OD and too small in ID. Need to get a seal asap. Rats!!!! 2inch id and 3,1095inch od. Had to use a 4 foot extender on the 3/4 Drive ratchet, but it came loose.

Today i got The T-O bearing return spring in, rear wheels and drums on, and half the exhaust in as well as flywheel lower cover plate.