Re: Mike's 53 Clipper
Posted by Tobs On 2014/7/14 10:41:28
Thanks Ross,
Here is a pic of the relay I got from herm the overdrive guy. I have the feed coming from my ignition switch going to the "switch" terminal, "batt" is constant hot from the starter, "load" goes down to the OD, and I guess "grd" goes to kickdown and then to OD....I'll check the wires that provide the ground to make sure I connected things properly. I think my Relay is wired correctly.
I was testing my electric with a battery charger that you can see on the front apron....It only provides a few amps, and has a circuit breaker so if something was badly wired, I wouldn't make too much damage like a fully charged battery could.
Attach file:
(60.38 KB)
Here is a pic of the relay I got from herm the overdrive guy. I have the feed coming from my ignition switch going to the "switch" terminal, "batt" is constant hot from the starter, "load" goes down to the OD, and I guess "grd" goes to kickdown and then to OD....I'll check the wires that provide the ground to make sure I connected things properly. I think my Relay is wired correctly.
I was testing my electric with a battery charger that you can see on the front apron....It only provides a few amps, and has a circuit breaker so if something was badly wired, I wouldn't make too much damage like a fully charged battery could.
Attach file:
(60.38 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=146835