Re: Mike's 53 Clipper
Posted by Tobs On 2014/11/10 12:35:45
OK! A few weeks ago I mediablasted the fenders clean, and used a rust converter (Fertan) to stop any little rust that was left on the fenders and hood. It also prevents flash rusting after mediablasting and washing with soap and water. Today I picked up the two front fenders and hood from the painter. They did a final sanding and used 3.5 liters of epoxy primer.
Next I will paint the inside surfaces black. That includes the underside of the hood, and insides of the fenders.
Should all the black surfaces on the hood/fenders be gloss, or a low-gloss/satin? sorry the pic is a cell-phone pic.
Thanks guys!
Attach file:
(86.27 KB)
Next I will paint the inside surfaces black. That includes the underside of the hood, and insides of the fenders.
Should all the black surfaces on the hood/fenders be gloss, or a low-gloss/satin? sorry the pic is a cell-phone pic.
Thanks guys!
Attach file:
(86.27 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=152939