Re: Mike's 53 Clipper
Posted by Tobs On 2016/12/18 11:13:43
Rear beltline trim around the base of the rear windows installed, rear windows installed, and "Packard Clipper" script installed on the trunk. I put some black paint in the insides of the p, a and e. It looked like there was some paint in there. Don't know if that was original or not. Next up will be to install some interior so the car looks completed when I go for inspection.
Also working on 3 point seatbelts. I made a re-enforcement for the shoulder point on the B pillar, and am not sure if i will attach the reel to the floor, or 1/3 of the way up the B pillar on the floor...The inner wall of the car is not that strong there, but I would also re-enforce that point. With the coupe, having the reel on the floor makes entrance/egress a little difficult.
Attach file:
(49.18 KB)
(42.80 KB)
Also working on 3 point seatbelts. I made a re-enforcement for the shoulder point on the B pillar, and am not sure if i will attach the reel to the floor, or 1/3 of the way up the B pillar on the floor...The inner wall of the car is not that strong there, but I would also re-enforce that point. With the coupe, having the reel on the floor makes entrance/egress a little difficult.
Attach file:
(49.18 KB)
(42.80 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=185823