Re: Mike's 53 Clipper
Posted by Tobs On 2017/4/23 13:28:43
You certainly can get it running without a timing light, but you should have one to get it properly dialed in.
The method brenda described will get you close, but not "right" or perfect.
Took the family for our first ride in the packard. A good time was had by all!
Same goes for tuning a carburetor or aligning the front end.You can get it close if you have experience doing it by eye or smell or feel, newbies or people that dont do this everyday for a living should use the tools to measure things exactly.
Attach file:
(230.33 KB)
The method brenda described will get you close, but not "right" or perfect.
Took the family for our first ride in the packard. A good time was had by all!
Same goes for tuning a carburetor or aligning the front end.You can get it close if you have experience doing it by eye or smell or feel, newbies or people that dont do this everyday for a living should use the tools to measure things exactly.
Attach file:
(230.33 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=190619