Re: Mike's 53 Clipper
Posted by Tobs On 2017/4/24 3:02:52
Here are the values from my front end alignment. It is within specs, and ok... the values aren't exactly perfect, but good enough. Even with the laser alignment system there is some tolerance in the measurements. Seems to drive ok. Next to dial in the carb and ignition better with timing light and vac gauge....Then I may try it with an exhaust sniffer to see how close the classic method is to a modern method.
Exhaust pipe aft of the muffler needs to be better placed, hope I can get it better aligned.
(still lots of little low priority things to do as well -glove box light, get wrinkles out of headliner in backseat, wire in radio and trunk light and courtesy lights.)
How many miles should I run on the first oil after break in?
Attach file:
(133.29 KB)
Exhaust pipe aft of the muffler needs to be better placed, hope I can get it better aligned.
(still lots of little low priority things to do as well -glove box light, get wrinkles out of headliner in backseat, wire in radio and trunk light and courtesy lights.)
How many miles should I run on the first oil after break in?
Attach file:
(133.29 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=190642