Re: Mike's 53 Clipper
Posted by DavidPackard On 2020/3/25 18:17:17
From the internet:
When properly used about 24 hours will give it time to cure completely. Must be in an area absent of oxygen to cure properly. As others said, ~24 hours for full cure/strength. Howsomever, to work as designed to, Loctite requires the parts it's used on to be clean and free of residue.
I worked with an engineer that at one time worked for Loctite in Connecticut. His insight:
The 'plastic' container the product comes in is quite porous to air but not the product itself . . . that's why I doesn't cure between use.
dp
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=220431