Re: Mike's 53 Clipper

Posted by Tobs on 2021/5/13 14:40:07
Update, that felt Ring goes way up in the top of the column behind the upper bearing by the steering wheel. -not down by the steering Box.
Column is back in with 1/8 to 1/16 inch clearance to the steering wheel. Shift linkage is lubed and adjusted. It makes driving and shifting easier. Downshifting between 3rd overdive and second overdrive with a blip of the throttle to rev match is a lot easier now. For a manual packard, cleaning, lubing and adjusting the shifter linkage to the spec of .025 inch sure does help to make selecting gears hassle free.
Cheers!

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=233466