Re: 23 series windshield wiper assembly?
Posted by HH56 On 2016/1/23 15:13:33
I will be very interested to see what BDeB says those are. Do the switch plungers actually do something with the assy? Don't recall ever seeing that arrangement and this photo BDeB posted in another thread of a 22 or 23 switch bank assy doesn't have anything like that showing.
Nothing I can think of down there would be part of a windshield wiper assy. The cable tensioner and idler pulleys are steel or diecast metal and up on the firewall under each blade pivot assy.
As to new fiber, 12" square sheets of different grades of Garolite or plain phenolic are available in various thicknesses from McMaster-Carr which would most likely take care of the sides. The wheels might be another story and I can't see enough detail on the photos to make any solid suggestions. Possibly a thicker sheet with a circle cut and then grooved on a lathe could make new.
Attach file:
(83.70 KB)
Nothing I can think of down there would be part of a windshield wiper assy. The cable tensioner and idler pulleys are steel or diecast metal and up on the firewall under each blade pivot assy.
As to new fiber, 12" square sheets of different grades of Garolite or plain phenolic are available in various thicknesses from McMaster-Carr which would most likely take care of the sides. The wheels might be another story and I can't see enough detail on the photos to make any solid suggestions. Possibly a thicker sheet with a circle cut and then grooved on a lathe could make new.
Attach file:
(83.70 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=171092