Re: Henry's 37 Limousine
Posted by Cli55er On 2016/9/17 16:47:48
here is what the brackets look like on my "37" tank in a car made before 12/24/36.
and compared to the aluminum 36 they have listed.
I also wonder if his are gravity or pressurized systems. I do see the bleed hose connection on the cap mount...so I'm not sure.
also my radiator core measures 24" tall by 17" wide....which better matches the 36 tank on the website.
looks like the only problem would be finding radiator hoses to fit as the inlet and outlet on the stock radiator are different from the generic ones on the aluminum version. one could use those bendable metal aftermarket ones...but those are bit too hotrod for me.
Attach file:
(50.38 KB)
(57.07 KB)
(37.49 KB)
(66.94 KB)
and compared to the aluminum 36 they have listed.
I also wonder if his are gravity or pressurized systems. I do see the bleed hose connection on the cap mount...so I'm not sure.
also my radiator core measures 24" tall by 17" wide....which better matches the 36 tank on the website.
looks like the only problem would be finding radiator hoses to fit as the inlet and outlet on the stock radiator are different from the generic ones on the aluminum version. one could use those bendable metal aftermarket ones...but those are bit too hotrod for me.
Attach file:
(50.38 KB) (57.07 KB) (37.49 KB) (66.94 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=182025