Re: Henry's 37 Limousine

Posted by JWL On 2016/10/4 15:42:08

Henry, thanks for more updates on your Limo project. You can do a quick check on the cam's condition by measuring the lobes with a mic (digital or analog). The intakes should all be the same and likewise the exhausts. This will give you a quick and good idea if any of the cam lobes are worn. You can also check the bearing journals this way too. Also, look at the bottom of the tappets for wear. They should all look the same, polished, but not cupped. Hope this helps.

(o[]o)