Re: Henry's 37 Limousine
Posted by Cli55er On 2016/11/14 16:28:21
iphone backup corrupt, lost 80% of my pictures. boooo!!
still had these to post though.
you can see how far away the end of the armature sits since i put the felt in. but looking at the parts book...there is nothing there other then metal washer for the models different then 138....and the fiber washer which is what mine has.
you can see the felt at the end and the top of the bushing in that one picture before i put the oiler back on.
starter is done otherwise. no real way to test it. guess i could use some jumper cables to the battery.
a better view of the grease cup for the distributer. idk if that is right, but thats how its going back on in my car.
paid a visit to the machine shop. block decked, bored, and honed. no studs broke during removal. still have to remove the ones on the side. these pics were after installation of new valve guides.
now that everything came in from Kanter, progress is being made. a bit of confusion on the piston rings, but we are sorting that out.
since i lost my pictures, maybe someone with a spare 4006 starer can take the inspection cover off and snap a pic of how everything looks in there compared to mine.
Attach file:
(30.48 KB)
(30.38 KB)
(41.11 KB)
(37.13 KB)
(32.86 KB)
(28.14 KB)
(29.31 KB)
(40.91 KB)
(23.78 KB)
(19.87 KB)
(33.90 KB)
(46.40 KB)
still had these to post though.
you can see how far away the end of the armature sits since i put the felt in. but looking at the parts book...there is nothing there other then metal washer for the models different then 138....and the fiber washer which is what mine has.
you can see the felt at the end and the top of the bushing in that one picture before i put the oiler back on.
starter is done otherwise. no real way to test it. guess i could use some jumper cables to the battery.
a better view of the grease cup for the distributer. idk if that is right, but thats how its going back on in my car.
paid a visit to the machine shop. block decked, bored, and honed. no studs broke during removal. still have to remove the ones on the side. these pics were after installation of new valve guides.
now that everything came in from Kanter, progress is being made. a bit of confusion on the piston rings, but we are sorting that out.
since i lost my pictures, maybe someone with a spare 4006 starer can take the inspection cover off and snap a pic of how everything looks in there compared to mine.
Attach file:
(30.48 KB) (30.38 KB) (41.11 KB) (37.13 KB) (32.86 KB) (28.14 KB) (29.31 KB) (40.91 KB)
(23.78 KB) (19.87 KB) (33.90 KB) (46.40 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=184525