Re: Henry's 37 Limousine

Posted by Cli55er On 2017/3/5 17:18:32

Spring that was broke was on the inside handle bracket. I had to get creative on getting it out as the window crank had a bolt the was broke and they are flat blade tipped. I had to loosen the top two and move the crank out of the way with the bottom bolt still in. This allowed just enough room to get the inner mechanism out of the door so I could replace the spring.

I used the spring from the 36 and also used the door latch from the 36 as come to find out my original latch was rigged pretty bad when compared to the 36.

Outside door handle is now solid and the inside door handle locks with a click now.


Just need to make or obtain two more inner springs for the passenger side so they click when locking. I would only need one more, but one of the 36 springs was already broken.