Re: Jim's Packard powered "Indy" car
Posted by Ozstatman On 2016/7/3 17:26:41
Still more from Jim.
"Here are the most recent pictures of the painted engine block. With the oil pan off, I was able to remove one rod cap and one main cap to see the wear pattern if any. All looked good, the pan will be cleaned up and repainted and will install tomorrow, then upright the motor to put it back together. Then I'll paint and detail the bell housing and tranny"
"My computer won't upload or down load pictures to the Packard Website for some reason"
Jim,
Have you had a look at this FAQ - WEBSITE: Photo Posting Guide Lines? Might help so you can post photos.
Attach file:
(46.70 KB)
(48.58 KB)
(52.28 KB)
(48.34 KB)
"Here are the most recent pictures of the painted engine block. With the oil pan off, I was able to remove one rod cap and one main cap to see the wear pattern if any. All looked good, the pan will be cleaned up and repainted and will install tomorrow, then upright the motor to put it back together. Then I'll paint and detail the bell housing and tranny"
"My computer won't upload or down load pictures to the Packard Website for some reason"
Jim,
Have you had a look at this FAQ - WEBSITE: Photo Posting Guide Lines? Might help so you can post photos.
Attach file:
(46.70 KB)
(48.58 KB)
(52.28 KB)
(48.34 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=178609