Re: 1930 boat tail speedster from a rough starting point

Posted by Mike Bartrom On 2017/3/10 0:05:39

Today's update is the rear deck is welded down and the grinding is about done. I started forming the bottom radius for the boat tail. This is a 1 1/2" exhaust tube split long ways into 1/3ds. I used my shrinker and stretcher to shape the piece. A little dolly and hammer work to remove the gross marks.

Hopefully this weekend the tail will really start to take shape.

Attach file:

---

  (143.53 KB)


  (144.49 KB)


  (125.30 KB)


  (151.19 KB)