Re: Joe's '49 Club Sedan

Posted by Tobs On 2018/5/17 15:36:52

Regarding the clover electronic voltage regulator... I have only 1 year of service on it, but it has so far been very good. When installing, I had to trim 1/4 inch off the top of the backing plate so it would fit on the firewall. That was not much trouble though. I have a voltage gauge in my car, and can see at idle voltage drops to 12.5 which is normal for a generator. At any rpm above idle, it stays very constant at 14v which is just right. The builder of these things can adjust voltage depending on if you are using a dry or wet cell battery. I also emailed him with a question before cutting the backing plate, and got a quick response. I'm happy with it.