Replacing wires in the 47 Turn Signal Controller
Posted by Wesley Boyer On 2017/9/30 9:37:55
The wires in Turn Signal Controller are in bad shape so I figured I would replace them. How hard could that be?
Well it turns out you have no clear access to the connectors so it looks like splicing in on the old wires would do the trick. But since I've got it out this far, I might as well go all the way.
Wes
Attach file:
(225.97 KB)
Well it turns out you have no clear access to the connectors so it looks like splicing in on the old wires would do the trick. But since I've got it out this far, I might as well go all the way.
Wes
Attach file:
(225.97 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=196215